Basic Operation - SATO RWG500 Quick Manual

Basic Operation

After setting up the rewinder to work with your SATO
printer, rewinding can be performed.
1
Turn on the rewinder. Wait for the status LED on
the control panel to start blinking in green. The
rewinder is now in idling status–ready to collect
labels from the printer.
2
Press and hold down the
START/STOP button on the
rewinder control panel. The
rewind shaft starts rotating,
and the tension arm rises
and stops automatically.
This process takes up any
slack in the label path.
When the Status LED is lit
in green continuously,
release the Start/Stop but-
ton. The rewinder is now in
operation.
If you release the Start/Stop
button before the Status
LED lights up continuously
in green, repeat Step 1.
22