SATO RWG500 Quick Manual page 13

Preparing the Joint Plate (cont'd)
To prepare the joint plate for the CL6XXe series printers:
When the movable
plate reveals
"MR6XXe" and
"CL6XXe", adjust its
position so that each
protruding stub (called
a boss) on the under-
side of the movable
plate will fit neatly into
two complementary
holes on the main plate.
The movable plate will
not slide easily now.
Tighten the two screws
Top of Underside
which were loosened in
movable of movable
Step 1.
plate plate
Boss
Boss
13