SATO RWG500 Quick Manual page 11

Preparing the Joint Plate (cont'd)
To prepare the joint plate for a GTx4XXe or M-84Pro
series printers:
When the movable plate
reveals "GTx4XXe" and
"M-84Pro", adjust its
position so that each pro-
truding stub (called a
boss) on the underside of
the movable plate will fit
neatly into two comple-
mentary holes on the
main plate. The movable
plate will not slide easily
now. Tighten the two
screws which were loos-
ened in Step 1.
Top of Underside
movable of movable
plate
Boss
plate
Boss
11