SATO RWG500 Quick Manual page 19

Label Setup (cont'd)
Besides setting the rewind direction, you can set up the
rewinder for direct rewinding or rewinding using a 3"
paper core.
About Direct Rewinding
Use direct rewinding when a paper core is not to be
used, and the label being collected will not need
reprinting or reprocessing in future.
1
Set the rewinder for
CW or CCW rewind
direction and load
the label accord-
ingly. Wind the label
at the rewinding
shaft, and insert the
provided label clip
to fasten the label
onto the shaft.
2
Now insert the label
guide. The label
output from the
printer is now set
for direct rewinding.
19