Table of Contents
Advertisement
Hint
You can change the automatically set ISO sensitivity range for the [ISO AUTO] mode.
Select [ISO AUTO] and press the right side of the control wheel, and set the desired
values for [ISO AUTO Maximum] and [ISO AUTO Minimum]. The values for [ISO AUTO
Maximum] and [ISO AUTO Minimum] are also applied when shooting in [ISO AUTO]
mode under [Multi Frame NR].
[109] How to Use
Multi Frame NR
The product automatically shoots multiple images continuously, combines them, reduces the
noise, and records them as one image. The image recorded is one combined image.
1. MENU →
2. Press the right side of the control wheel to display the setting screen, then select a
desired value using the top/bottom side of the control wheel.
Note
When [
Quality] is set to [RAW] or [RAW & JPEG], this function cannot be used.
The flash, [D-Range Opt.], and [Auto HDR] cannot be used.
You cannot set [Multi Frame NR] when [Picture Effect] is set.
Hint
You can change the automatically set range of ISO sensitivity in the [ISO AUTO] mode
under [Multi Frame NR]. Select [ISO AUTO] under [ISO] and press the right side of the
control wheel, and set the desired values for [ISO AUTO Maximum] and [ISO AUTO
Minimum]. The values for [ISO AUTO Maximum] and [ISO AUTO Minimum] are also
applied when shooting in [ISO AUTO] mode under [Multi Frame NR].
[110] How to Use
D-Range Opt. (DRO)
By dividing the image into small areas, the product analyzes the contrast of light and shadow
between the subject and the background, and creates an image with the optimal brightness
and gradation.
Using shooting functions
(Camera Settings) → [ISO] → [Multi Frame NR].
Using shooting functions
Selecting the ISO sensitivity
Correcting the brightness or contrast
Advertisement
Table of Contents
