Multi Frame Nr - Sony ILCE-7RM2 How To Use Manual

The difference in shutter speed at which ISO sensitivity starts to change
between [Faster], [Fast], [Standard], [Slow], and [Slower] is 1 EV.
Note
If the exposure is insufficient even when the ISO sensitivity is set to [ISO AUTO
Maximum] in [ISO AUTO], in order to shoot with an appropriate exposure, the
shutter speed will be slower than the speed set in [ISO AUTO Min. SS].
In the following situations, the shutter speed may not function as set:
When using the flash to shoot bright scenes. (The maximum shutter speed is limited
to the flash-synching speed of 1/250 seconds.)
When using the flash to shoot dark scenes with the [Flash Mode] set to [Fill-flash] or
[Wireless]. (The minimum shutter speed is limited to the speed automatically
determined by the camera.)
[117] How to Use

Multi Frame NR

The product automatically shoots multiple images continuously, combines them,
reduces the noise, and records them as one image. The image recorded is one
combined image.
1. MENU →
2. Press the right side of the control wheel to display the setting screen, then
select a desired value using the top/bottom side of the control wheel.
Note
When [ Quality] is set to [RAW] or [RAW & JPEG], this function cannot be
used.
The flash, [D-Range Opt.], and [Auto HDR] cannot be used.
When [Picture Profile] is set to something other than [Off], you cannot set [Multi
Frame NR].
When [Picture Effect] is set to something other than [Off], you cannot set [Multi
Frame NR].
Hint
Using shooting functions
(Camera Settings) → [ISO] → [Multi Frame NR].
Selecting the ISO sensitivity