Table of Contents
Advertisement
[107] How to Use
Multi Frame NR
The product automatically shoots multiple images continuously, combines them,
reduces the noise, and records them as one image. The image recorded is one
combined image.
1. MENU →
2. Press the right side of the control wheel to display the setting screen, then
select a desired value using the top/bottom side of the control wheel.
Note
When [
Quality] is set to [RAW] or [RAW & JPEG], this function cannot be
used.
The flash, [D-Range Opt.], and [Auto HDR] cannot be used.
When [Picture Profile] is set to something other than [Off], you cannot set [Multi
Frame NR].
When [Picture Effect] is set to something other than [Off], you cannot set [Multi
Frame NR].
Hint
You can change the automatically set range of ISO sensitivity in the [ISO
AUTO] mode under [Multi Frame NR]. Select [ISO AUTO] under [ISO] and
press the right side of the control wheel, and set the desired values for [ISO
AUTO Maximum] and [ISO AUTO Minimum]. The values for [ISO AUTO
Maximum] and [ISO AUTO Minimum] are also applied when shooting in [ISO
AUTO] mode under [Multi Frame NR].
[108] How to Use
D-Range Opt. (DRO)
By dividing the image into small areas, the product analyzes the contrast of light
and shadow between the subject and the background, and creates an image with
Using shooting functions
(Camera Settings) → [ISO] → [Multi Frame NR].
Using shooting functions
Selecting the ISO sensitivity
Correcting the brightness or contrast
Advertisement
Table of Contents
