Table of Contents
Advertisement
1. MENU →
assigned to the button → [In-Camera Guide]
2. Press the MENU or Fn button.
3. Select the desired MENU item using up/down/left/right side on the control wheel.
4. Press the button to which the [In-Camera Guide] function is assigned.
The operation guide for the MENU item you have selected in step 3 is displayed.
If you press the
in gray, the reason the item cannot be set is displayed.
[13] How to Use
Charging the battery pack using a charger
When using the camera for the first time, be sure to charge the InfoLITHIUM NP-FM500H
(supplied). The InfoLITHIUM battery pack can be charged even when it is not fully depleted.
It can also be used when it is not fully charged. The charged battery pack discharges little by
little even when it is not being used. To avoid missing a shooting opportunity, charge the
battery pack again before shooting.
1. Insert the battery pack into the battery charger.
Push the battery pack lightly until it clicks.
2. Connect the battery charger to the wall outlet (wall socket).
How to connect the battery charger may differ depending on the country/region.
With the battery charger that can be connected to the wall
outlet (wall socket) directly
(Custom Settings) → [Custom Key Settings] → desired functions
on the center of the control wheel after selecting an item shown
Preparing the camera
Charging the battery pack
Advertisement
Table of Contents
