Table of Contents
Advertisement
Note
If you fire the flash before the flash unit pops up entirely, it may cause malfunction.
You cannot use the flash when recording movies.
While charging the flash,
light up.
When an external flash (sold separately) is attached to the Multi Interface Shoe, the state
of the external flash has priority over the setting of the product. You cannot use the
product's internal flash.
Before attaching/removing an accessory such as a flash to/from the Multi Interface Shoe,
turn off the product first.
When attaching an accessory, insert it fully to the Multi Interface Shoe and screw tightly.
Also, make sure that the accessory is fixed securely to the product.
Do not use a commercially available flash with high-voltage synchro terminals or with
reverse polarity.
The light of the flash may be blocked by the lens attached.
The corners of a recorded image may be shaded, depending on the lens.
[51] How to Use
Flash Mode
You can set the flash mode.
1. MENU →
Menu item details
Flash Off:
The flash does not operate.
Autoflash:
The flash works in dark environments or when shooting towards bright light.
Fill-flash:
The flash works every time you trigger the shutter.
Slow Sync.:
The flash works every time you trigger the shutter. Slow sync shooting allows you to shoot a
clear image of both the subject and the background by slowing the shutter speed.
Rear Sync.:
The flash works right before the exposure is completed every time you trigger the shutter.
Rear sync shooting allows you to shoot a natural image of the trail of a moving subject such
flashes. After charging is completed, the flashing icon will
Using shooting functions
(Camera Settings) → [Flash Mode] → desired setting.
Using the flash
Advertisement
Table of Contents
