Table of Contents
Advertisement
Focus areas of the subject that are within the set AF range area will be displayed in
yellow.
3. Press the C2 (Custom 2) button again and decide the shooting distance.
The restricted area will remain displayed.
Focus areas of the subject that are within the set distance will be displayed in yellow.
To end the AF range control function
Press the C2 (Custom 2) button again.
Hint
After adjusting the focus to the desired subject, restrict the AF range so that the lens
focus indicator
Set the AF range to within or outside the restricted value while watching the yellow focus
area.
Note
[AF Range Control] cannot be used in Manual focus mode or when shooting movies.
If you change the lens, the set AF range will be reset.
When you are using a lens equipped with a focus range limit function, do not use the
camera's [AF Range Control] function at the same time. Use the function on either the
lens or the camera.
If you use a lens that is not equipped with a distance encoder, the shooting distance is not
displayed.
The shooting distance value is an estimate.
The set value of the AF range, the shooting distance value, and the actual focus point
may differ slightly.
The actual set AF range and the yellow guide of the focus area may not correspond.
The focus area may not be displayed in yellow when the lens does not attain proper
focus.
When the light is not strong enough or there is not much contrast in the subject, such as
with monotone and flat surfaces, the focus area may not be displayed in yellow. In that
case, use the outline of the subject as a guide.
[88] How to Use
Priority setup
Sets whether or not to release the shutter even when focus is not achieved in auto focus
mode.
falls within the set range.
Using shooting functions
Adjusting the focus
Advertisement
Table of Contents
