Table of Contents
Advertisement
Menu item details
Ambient&flash (default setting):
Applies the exposure compensation value to control both flash light and ambient light.
Ambient only:
Applies the exposure compensation value to control ambient light only.
[95] How to Use
Zebra
The zebra pattern will appear over part of an image if the brightness level of that part meets
the IRE level that you set. Use this zebra pattern as a guide to adjust the brightness.
1. MENU →
Menu item details
Off (default setting):
Does not display the zebra pattern.
70/75/80/85/90/95/100/100+:
Adjusts the brightness level.
Note
The zebra pattern is not displayed during HDMI connection.
[96] How to Use
Exposure Set. Guide
You can set whether to display a guide when you change the exposure.
1. MENU →
Menu item details
Off (default setting):
Does not display the guide.
On:
Using shooting functions
(Custom Settings) → [Zebra] → desired setting.
Using shooting functions
(Custom Settings) → [Exposure Set. Guide] → desired setting.
Adjusting the exposure
Adjusting the exposure
Advertisement
Table of Contents
