Remote Microphone Rm-200M; Remote Microphone Extension Rm-210 - Toa SV-200M Instruction Manual

Remote Microphone RM-200M

Power Source
Current Consumption
Distortion
Frequency Response
Signal-to-Noise Ratio
Audio Output
Microphone
Speaker Control
Emergency Broadcast
Voice Message Control
No. of Connectable Units
Communication System
Volume Control
Connection Cable and Connector
Communication Distance
DC Power Supply from Amplifier
Finish
Dimensions
Weight
* 1 0 dB = 1 V
* 2 An optional EV-200 Board must be mounted in the VM-2120 or VM-2240 Amplifier.
The voice messages must be pre-recorded into a CF (CompactFlash) card to be inserted into the EV-200
Board.
* 3 Suppliable AC adapters
Part name
AD-4800 (US) 100-07-290-70
AD-4800 (ER) 100-07-291-80
AD-4800 (BS) 100-07-292-10
AD-4800 (AS) 100-07-293-60
Note: The design and specifications are subject to change without notice for improvement.

Remote Microphone Extension RM-210

Current Consumption
Connection
Function
Finish
Dimensions
Weight
Note: The design and specifications are subject to change without notice for improvement.
24 V DC (Operating range: 14 – 28 V DC)
Power input jack:
Usable power input plug*
100 mA maximum
Under 1%
100 – 20,000 Hz
Over 60 dB
, 600 Ω, balanced
0 dB* 1
Unidirectional electret condenser microphone
Zones 1 – 5 or Zones 1 – 10 (2 stacked amplifiers connection),
Groups 1 – 2, and All-Zone Broadcast
Activation of Emergency Broadcast (pre-recorded announcement*
or live microphone announcement) by Emergency Broadcast Switch
Activation of 5 messages*
Up to 4
RS-485 Control
Microphone volume control
Category 5 STP cable, RJ45 connector
800 m maximum in total
Only a single unit can be power-supplied from VM-2120 or VM-
2240 amplifier. Line resistance: Under 40 Ω (one way)
ABS resin
190 (w) x 76.5 (h) x 215 (d) mm (Gooseneck microphone excluded)
750 g
Part code Remarks
120 V AC version
230 V AC version
20 mA maximum (in terms of RM-200M's DC power input)
Connection to RM-200M by dedicated cable
Activation of Voice Announcement Board's voice messages when
controlling speakers in 10 zones at RM-200M
ABS resin
110 (w) x 76.5 (h) x 215 (d) mm
350 g
Non-polarity type
3 : Outer diameter ø5.5 mm, inner diameter
ø2.1 mm, length 9.5 mm
2
2
59