Linkage Between Remote Microphone And Its Extension - Toa SV-200M Instruction Manual

25. LINKAGE BETWEEN REMOTE MICROPHONE AND ITS EXTENSION

When adding the RM-210 Remote Microphone Extension, link it with the RM-200M Remote Microphone using
the extension cable and mounting hardware supplied with the RM-210.
Step 1. Turn over both the RM-200M and the RM-210, and keep them in close contact with each other.
Step 2. Connect between both units using the extension cable.
Step 3. Using 4 supplied screws (marked with [
together.
Step 4. Using 8 supplied screws ([
Note: If incorrect or loose connection is found between both units, loosen all the bracket fixing screws to
disassemble the units and then link them again with the screws.
2
Extension cable
RM-210
] marking) and 2 pieces of Linkage Bracket A, fix both units securely.
Linkage bracket A
RM-210
] in the figure) and Linkage Bracket B, link both units
3
Linkage bracket B
RM-200M
RM-200M
Bottom side
Bottom side
49