Toa SV-200M Instruction Manual page 58

Model No.
Function
Operating Temperature
Finish
Dimensions
Weight
* 1 0 dB = 1 V
* 2 Can be transformer-balanced with the addition of an optional IT-450 input transformer.
* 3 For connection of the Paging Microphone PM-660D with a remote control switch
* 4 An optional EV-200 Voice Announcement Board is required.
The messages and chime sound source must be pre-recorded into a CF (CompactFlash) card to be
inserted into the EV-200 Board.
* 5 An optional SV-200M Surveillance Board is required.
* Usable cable gauge: AWG26 – AWG20
6
* 7 Usable cable gauge: AWG24 – AWG12
Specifications of the AWG cables
AWG Diameter (Solid)
12 2.052 mm
14 1.628 mm
20 0.8128 mm
22 0.6426 mm
24 0.5105 mm
26 0.4039 mm
Note: The design and specifications are subject to change without notice for improvement.
58
VM-2120
Two units stacking (VM-2120 or VM-2240)
Emergency broadcast (sequential control)
Broadcast priority control
Surveillance (failure detection) function
Power supply to Remote Microphone
419 (w) x 143.3 (h) x 355.7 (d) mm
12.5 kg
Cross-section (Stranded)
2
3.309 mm
2
2.082 mm
2
0.5189 mm
2
0.3243 mm
2
0.2047 mm
2
0.1281 mm
0 – 40 °C
Panel: ABS resin
Case: Steel plate, paint
VM-2240
14.5 kg