Recorded Message-To-Group Assignment; Operating Keys - Toa SV-200M Instruction Manual

24.1.3. Recorded Message-to-Group assignment

Activated messages (1 – 5) are broadcast to their respectively assigned groups 1 – 5. (See p. 48 "Recorded
Message-to-Group Assignment Operation.")
Setting example (
Recorded Message
(Setting item)
Message 1
Message 2
Message 3
Message 4
Message 5
Messages are broadcast to the zones selected in the above Zone-to-Group assignment.
[Default setting]
Only "All zones" is assigned to each of Messages 1 – 5. (Example: Message 3 setting in the above table)

24.2. Operating Keys

Master VM amplifier
Sub-VM amplifier
* 1 See p. 45 "Indicator status."
* 2 Function as the indicators or keys for the setting items (Group 1 – 5, Message 1 – 5, etc.) as well according
to the setting steps.
• Note that the Sub-unit's zone selector keys function as the ZONE 6 through ZONE 10 keys.
• The figure above shows a 10-zone broadcast system where master unit and sub-unit are linked together.
A 5-zone broadcast system requires the master unit only.
42
mark indicates "Set" state.)
Broadcast Group ALL zones (Marking a check bypasses the
1 2 3 4 5
external attenuator on all-zone broadcast.)
2
ZONE 1 – 5 keys*
ZONE 1 – 5 indicators*
Reset key
ZONE 6 – 10 indicators
ZONE 6 – 10 keys
Setting content
ALL indicator
1 2
*
ALL key
POWER switch
LINK connector (rear)
LINK connector (rear)