Pairing with a new remote control
Compatible BenQ remote control model: RCI077
In case you have received a new remote control from BenQ customer
service, you need to pair it with your projector (with ATV dongle QS02
installed) before use.
1. Make sure the projector (with ATV dongle QS02 installed) is powered
on and the batteries are installed to the remote control.
2. Keep the remote control close to your projector within 20 cm.
3. Press the
up the pairing screen.
4. Press and hold the
as instructed to start pairing. Follow the on-screen instructions to
complete.
and
buttons together on the remote control to bring
and
buttons together again for 10 seconds
73