Roland VS-2480 User Manual page 85

Writing speed to CD-R (For example)
MAX: Write to the disc with the maximum speed.
x4: The project will be written at quad speed.
x2: The project will be written at double times speed.
When writing speed is early many time is not required.
However, in many instances where a disc could not be written to successfully, it is
due to the fact that the speed was just too fast for processing to take place reliably.
16. Use TIME/VALUE dial to select the speed at which the project will be
written to the CD-R/RW disc.
fig.06-01_50
17. Press [F5 (OK)]. "Audio CD-R
Write Sure?" message will
appear.
18. Press [ENTER/YES]. A
message with license
agreement will appear.
19. Please read the message
carefully, and if you accept
the agreements, press
[ENTER/YES]. The
VS-2480/2480CD will begin
writing to the CD-R/RW disc.
If you do not accept the
agreements, press [EXIT/NO].
You will return to CD-R
WRITE screen.
fig.06-05(SCMS)
20. When the data has been written, the display will ask "Write Another?"
(Write another disc?)
If you wish to write the same project data to another CD-R/RW disc, insert the new
disc into your CD-R/RW drive, and press [ENTER/YES]. If you press [EXIT/NO]
you will return to CD-R WRITE screen.
17
PAGE F1 F2 F3 F4 F5
TRACK EDIT
EZ
ROUTING
COPY MOVE TRIM IN TRIM OUT DELETE SPLIT
PATCH BAY
COPY MOVE INSERT CUT ERASE COMP / EXP.
AUTOMIX
A.PUNCH IN OUT FROM TO LOOP
MENU
CD-RW
MASTERING PROJECT TRACK EFFECT UTILITY
/
MIDI DISK
LOCATOR / MARKER / SCENE
7 8 9
LOCATOR SCENE
BANK AUX 7 AUX 8 USER BANK
4 5 6
MARKER
AUX 4 AUX 5 AUX 6
1 2 3
AUX 1 AUX 2 AUX 3
PREVIOUS NEXT SHIFT
0
/ -
PREVIEW
FROM
TO THRU ENTER EXIT
EXT SYNC /
SCRUB YES
PROJECT TOP PROJECT END
ZERO STOP PLAY REC
18,19,20
STORE SHUT / EJECT RESTART AUTOMIX REC
18,19,20
Creating an Original Audio CD
The speeds that can be
selected will depend on the
CD-R/RW drive you use.
DISPLAY
F6 HOME
NEW PHRASE
IMPORT REGION
GRADATION AUTOMIX
WAVE DISP UNDO
REDO
+
+
ZOOM
TIME / VALUE
SHUTTLE
/
NO
85