Roland VS-2480 User Manual page 32

Making a Multi-Track Recording
fig.03-01_50
6.
Use TIME/VALUE dial to select the Sample
Rate (96kHz, 88.2kHz, 64kHz, 48kHz,
44.1kHz, 32kHz). Normally, choose "44.1k."
7.
Press [ ] to move the cursor to "Record
Mode."
8.
Use TIME/VALUE dial to select the
Recording Mode (M24, MTP, CDR, M16,
MT1, MT2, LIV, LV2). Normally, choose
"MTP."
9.
Press [F5 (OK)]. "STORE Current?" message
will appear.
fig.dialog-
store
10. If you wish to store the current project, press [ENTER/YES]. If not, press
[EXIT/NO].
11. Home Condition screen will appear.
32
9
DISPLAY
F3 F4 F5 F6
HOME
TRACK EDIT
TRIM OUT DELETE SPLIT NEW PHRASE
IMPORT REGION
CUT ERASE COMP / EXP.
GRADATION AUTOMIX
FROM TO LOOP WAVE DISP
UTILITY
MIDI / DISK
+
+
ZOOM
SCENE
BANK
TIME / VALUE
SHUTTLE
SHIFT
ENTER EXIT
EXT SYNC / /
YES NO
6,8
REC
AUTOMIX REC
10 10
current
When 96kHz, 88.2kHz or
64kHz is selected and M24,
M16 or CDR is selected,
simultaneous
UNDO
recording/playback is
REDO
limited to eight tracks.
For details refer to Owner's
7 Manual "About Recording
Mode." (Owner's Manual
p. 74)
The demo performance are
protected so that their
contents cannot be
modified (Project Protect,
Owner's Manual). They
cannot be recorded, edited,
or saved. If a demo
performance is selected, the
"STORE Current?"
message will not appear,
and step 10 will not be
necessary.
For details refer to
"Creating a New Project
(Project New)."