Roland VS-2480 User Manual page 26

Listening to the Demo Performance
projects.
11. Select the recovery-destination. Press [F4 (SelDrv)].
Use the TIME/VALUE dial to move the cursor to the recovery-destination,
and press [F5 (SELECT)]. If you change your mind about the drive
selection, press [F6 (CANCEL)].
12. Press [F5 (OK)]. "Recover from SCSIx Sure?" (x is SCSI ID number)
message is displayed.
13. Press [ENTER/YES]. Loading of data starts. If loading finishes, it will
return to a home condition screen.
If a disc tray does not open
If the power is turned off with the disc still in the drive (such as due to a
power failure), the disc tray cannot be opened by pressing the eject
button. In this case, you can insert a piece of wire to force the tray open.
1.
Turn off the power of the VS-2480CD.
2.
Insert a thin object such as a wire into the emergency eject hole.
The disc tray will open.
Emergency Eject Hole
26
Make sure the VS-2480CD's
power has been turned
OFF before attempting to
use the emergency eject
hole. If you insert
something while the power
is on, the disc could get
damaged, or unexpected
problems may occur.