Adding Track Number Markers - Roland VS-2480 User Manual

Add Finishing Touches to Your Project

Adding Track Number Markers

By placing two or more projects one after the other in the same track, you can write
these projects consecutively to the CD-R disc. In this case, you can place markers
between projects to function as track numbers, just as on a pre-recorded audio CD.
These track numbers will be written to the audio CD that you record on your CD-R
drive.
fig.05-14_55
1.
While listening to the
project, use the
TIME/VALUE dial or
SHUTTLE ring to move
to the location where
you wish to place a track
number. You will
probably find it
convenient to use the
Preview function
(Owner's Manual p. 42)
or the Scrub function
(Owner's Manual p. 43).
2.
Hold [CD-RW (MASTERING)] and press [TAP]. A track number marker
will be placed at the current time location.
3.
Press [PREVIOUS] to move to the marker preceding the current time. Press
[NEXT] to move to the marker next the current time.
80
MENU
CD-RW
MASTERING PROJECT TRACK EFFECT UTILITY
2
LOCATOR / MARKER / SCENE
7 8 9
LOCATOR SCENE
BANK AUX 7 AUX 8 USER BANK
4 5 6
MARKER
AUX 4 AUX 5 AUX 6
1 2 3
AUX 1 AUX 2 AUX 3
PREVIOUS NEXT
0
/ -
PREVIEW
TO THRU FROM
SCRUB EXT SYNC
PROJECT TOP PROJECT END
ZERO STOP PLAY
STORE SHUT / EJECT RESTART
3 3
REDO
MIDI / DISK
+
+
ZOOM
TIME / VALUE
SHUTTLE
1
SHIFT
ENTER EXIT
/ YES / NO
REC
AUTOMIX REC
For details refer to "Setting
Edit Points Using Preview"
(Owner's Manual p. 42)
and "Setting Edit Points
Using Scrub" (Owner's
Manual p. 43).