Deleting An Unwanted Portion At The End Of The Project - Roland VS-2480 User Manual

Add Finishing Touches to Your Project
6.
Use the TIME/VALUE dial or SHUTTLE ring to move to the time location
at which you wish to stop writing.
7.
Press [2]. The end time of the project will be registered, and the [2]
indicator will light.

■ Deleting an Unwanted Portion At the End of the Project

fig.05-07_50
1.
Press [HOME
(DISPLAY)]. Home
Condition will
appear.
2.
Press
[PHRASE/REGION]
in TRACK EDIT
several times until
indicator light red.
3.
Press [2]. Move to
the time location at
which you wish to
stop writing.
4.
Press [IN] in TRACK
EDIT. The start time
of the region to be
erased will be
registered as the edit
start time, and the
[IN] indicator will
light.
5.
Hold [SHIFT] and press [PROJECT END (FROM)] in PREVIEW. Move to
the time location to end of project.
6.
Press [OUT] in TRACK EDIT. The end time of the region to be erased will
be registered as the edit end time, and the [OUT] indicator will light.
7.
Use [
][
8.
Press [ENTER/YES].
9.
Press [CUT] in TRACK EDIT.
10. When Track Cut is completed, "Done!" dialog will appear, and erase from
in time to out time.
11. Press [HOME (DISPLAY)]. Home Condition screen will appear.
78
F1 F2
PAGE
6
EZ
ROUTING
COPY MOVE
PATCH BAY
COPY MOVE
AUTOMIX
A.PUNCH IN
4
MENU
CD-RW
MASTERING PROJECT TRACK
LOCATOR / MARKER / SCENE
7 8
LOCATOR
BANK AUX 7 AUX 8
4 5
MARKER
AUX 4 AUX 5
1 2
3
AUX 1 AUX 2
PREVIOUS
0
/ -
PREVIEW
TO THRU
SCRUB
PROJECT TOP PROJECT END
ZERO STOP PLAY
STORE SHUT / EJECT RESTART
]to move the cursor that you wish to cut the tracks.
9
DISPLAY
F3 F4 F5 F6
HOME
1,11
TRACK EDIT
2
TRIM IN TRIM OUT DELETE SPLIT NEW PHRASE
IMPORT REGION
INSERT CUT ERASE COMP / EXP.
GRADATION AUTOMIX
OUT FROM TO LOOP WAVE DISP UNDO
REDO
EFFECT UTILITY
MIDI / DISK
+
+
ZOOM
9
SCENE
USER BANK
TIME / VALUE
6
SHUTTLE
AUX 6
3
AUX 3
SHIFT
NEXT
FROM ENTER EXIT
EXT SYNC
/ YES / NO
REC
8
AUTOMIX REC
5
If the locator number
indicators are already lit,
time locations have already
been registered. If you wish
to re-register them, hold
down [CLEAR] and press
locator number. The
indicator will go out, and
the locators will be erased.
If the locator number
indicators are already lit,
time locations have already
been registered. If you wish
7
to re-register them, hold
down [CLEAR] and press
locator number. The
indicator will go out, and
the locators will be erased.