Vm-3100Pro; Connecting A Vsr-880 To The Vm-3100Pro - Roland VM-7100 Connection Manual

Equipment connection and setting guide
Hide thumbs Also See for VM-7100:
Table of Contents

Advertisement

(12) Connecting a VSR-880 to the VM-3100Pro

• Transferring audio via digital connection between the VSR-880 and the VM-3100Pro.
• The VSR-880 can be controlled with the VM-3100Pro's transport buttons such as play and stop.
Connection
fig.12
Sampling Clock
S
Control Signal
C
T
Time Code
Equipment required
VM-3100Pro, VSR-880 [internal IDE hard disk installed]
Turning on the system
Connect the equipment and then turn the power on in the following order.
VSR-880

VM-3100Pro

Settings
VM-3100Pro
SYSTEM PREF page
• MasterClk:
• LocatorType:
• RecorderType:
SYSTEM MIDI page
• DeviceID:
• TimingMon:
• TC Fmt:
• Transport:
EZR OUT page
Transmitting the output from channels 1-8 directly to R-BUS 1-8
• Tr1/2=:
CH01/02
• Tr5/6=:
CH05/06
VSR-880
[SHIFT]+[SYSTEM (
)]
• SYS: MasterClk:
[SHIFT]+[SYSTEM (
)]
• MID:DeviceID:
• MID:MMC:
[SHIFT]+[SYSTEM (
)]
• Syn:Source:
• Syn:Gen.:
• Syn:MTC Type:
[LEVEL/BALANCE]
• MST Direct Out:
[SHIFT]+[IN MIX (LEVEL BALANCE)]
• IN1 (2, 3, ... 8) Input=: R-BUS
In addition to Play and Stop, the following control of the VSR-880 is possible with the VM-3100Pro. For the details,
please refer to "VSR-880 Connecting the VM-3100Pro" attached to the VSR-880 owner's manual.
• Playback Time
• Scrub
• Song Select *Operate with all the faders down to the lowest position.
• Song Store
18
[SYSTEM]
INTERNAL
TIMECODE
HD
[SYSTEM]
[F1-F4 ON/OFF]
17 (in accordance with MID:DeviceID on the VSR-880)
TIMECODE
30ND (in accordance with Syn:MTC Type on the VSR-880)
RECORDER
[EZ ROUTING]
[F1-F4 ON/OFF]
"SYS System PRM?"
R-BUS
"SYS MIDI PRM?"
[ENT/YES]
17 (in accordance with MID:DeviceID on the VSR-880)
Off/RBUS
"SYS Sync/Tempo PRM?"
INT
R-BUS
30 (in accordance with TC Fmt on the VM-3100Pro)
(PARAMETER [
][
On
(PARAMETER [
[SHIFT]+[LEVEL METER (BIG TC)]
[SHIFT]+[LEVEL METER (BIG TC)]
[LEVEL METER]
[F1-F4 ON/OFF]
Select a song with the value dial
[SHIFT]+[
]
[ENTER/YES]
VM-3100Pro
S
C
[F2](MIDI)
[F2](OUT)
Tr3/4=:
CH03/04
Tr7/8=:
CH07/08
[ENT/YES]
(PARAMETER [
(PARAMETER [
[ENT/YES]
(PARAMETER [
])
][
])
"Input="
Value dial
Hold [
[F3] (MTR)
[ENTER/YES]
R-BUS
T
(CURSOR
)
][
])
][
])
][
])
[SHIFT]+STATUS [1] to [8]
]
Switch tracks with [SELECT] 1-8
[F1-F4 ON/OFF]
[F4] (SONG)
VSR-880

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vm-7200R-bus

Table of Contents