Connecting A Vm-7200/7100 To The Vs-2480 With Word Clock - Roland VM-7100 Connection Manual

(22) Connecting a VM-7200/7100 to the VS-2480 with word clock

• Transferring audio via digital connection between the VS-2480 and the VM-7200/7100.
• VS-2480 can be controlled with the VM-C7200/7100's transport buttons such as play and stop.
Connection
VM-C7200/C7100
Sample Clock
S
C
Control Signal
T
Time Code
Equipment required
VM-7200/7100 [equipped with the VM-24E sold separately], VM-C7200/C7100, VS-2480 [internal IDE hard disk installed],
RBC-1/5 R-BUS cables (sold separately)
Turning on the system
Connect the equipment and then turn the power on in the following order.
VS-2480 VM-7200/7100
Settings
VS-2480
Projects setting screen
• Master Clock:
MIDI Parameter setting screen
• MMC Mode:
• MMC SOURCE:
Sync/Tempo screen
• Sync Mode:
Routing setting screen
• INPUT MIXER
Press [HOME (DISPLAY)] to return the Home Condition screen.
VM-C7200/C7100
SYS DIGITAL page
• WORD CLOCK SOURCE:
SYS SYNC/MMC page
• SYNC MASTER:
• MMC MASTER:
• MACHINE TYPE:
Synchronizing the VS-2480 to an external word clock (MASTER CLOCK: WORD CLOCK IN) requires that any other connected
digital device also be synchronized to the word clock. In addition, the VS-2480's termination is always on. When chaining with a
T-junction, turn off the terminator on other devices.
28
WORD CLOCK MASTER
MIDI IN VM-7200/7100
C
T
VM-LINK
VM-C7200/C7100
[UTILITY] (Page1) [F3(Proj)]
WORD CLOCK
[UTILITY] (Page1) [F5(MIDI)]
SLAVE
R-BUS1
[UTILITY] (Page1) [F6(SYNC)]
INT
[EZ ROUTING]
Connect 1-8 of R-BUS1 to any of 1-24.
[SHITFT] + [SYSTEM (PROJECT)]
WORD CLOCK IN
[SHIFT] + [SYSTEM (PROJECT)]
EXT, MULTI 1-8
INT
HD
S
S
S
WORD CLOCK IN
C
1-8
R-BUS1
R-BUS
DAT Recorder
DIGITAL IN/OUT
WORD CLOCK IN
T
VS-2480
[F DIGITAL I/O
[F SYNC CLOCK