Connecting A Computer-Based Recording System To The Vm-3100Pro Via An Adat Interface - Roland VM-7100 Connection Manual

(17) Connecting a computer-based recording system to the
VM-3100Pro via an ADAT interface
• Transferring audio via digital connection between a computer-based recording system equipped with an ADAT interface
and the VM-3100Pro.
Connection
fig.17
Sampling Clock
S
Equipment required
VM-3100Pro, DIF-AT, computer-based recording system (equipped with an ADAT interface), MIDI interface, MIDI cable
Turning on the system
Connect the equipment and then turn the power on in the following order.
Computer-based recording system
Settings
VM-3100Pro
DIF-AT PREF
• ClockSel: RMDB-2
• AudioSel: ADAT
SYSTEM PREF page
• MasterClk: INTERNAL
EZR OUT page
Transmitting the output from channels 1-8 directly to R-BUS 1-8
• Tr1/2=:
• Tr3/4=:
• Tr5/6=:
• Tr7/8=:
Computer-based recording system
• Set the sampling clock source to ADAT OPTICAL.
The VM-3100Pro works only with a 44.1kHz sampling rate. Connected equipment also should be operated at 44.1kHz.
O Sampling clock master: Computer-based recording system
VM-3100Pro
DIF-AT PREF
• ClockSel:
• AudioSel:
SYSTEM PREF page
• MasterClk:
Computer-based recording system
• Set the sampling clock source to Internal.
The VM-3100Pro works only with a 44.1kHz sampling rate. Connected equipment also should be operated at 44.1kHz.
VM-3100Pro
S
VM-3100Pro
[LEVEL METER] [F1-F4 ON/OFF]
[SYSTEM]
[EZ ROUTING] [F1-F4 ON/OFF]
CH01/02
CH03/04
CH05/06
CH07/08
[LEVEL METER] [F1-F4 ON/OFF]
ADAT
ADAT
[SYSTEM]
RMDB-2
R-BUS
IN OUT
S
OUT
[F3](MTR) [F1-F4 ON/OFF]
[F2](OUT) (CURSOR
[F3](MTR) [F1-F4 ON/OFF]
POWER
adat OPTICAL
IN
AUDIO INTERFACE
(adat OPTICAL INTERFACE)
PC-based Recorder
[F4](PREF)
)
[F4](PREF)
23