Connecting One Vsr-880 To The Vm-7200/7100 - Roland VM-7100 Connection Manual

Equipment connection and setting guide
Hide thumbs Also See for VM-7100:
Table of Contents

Advertisement

(2) Connecting one VSR-880 to the VM-7200/7100

• Transferring audio via digital connection between the VSR-880 and the VM-7200/7100.
• A VSR-880 can be controlled with the VM-C7200/7100's transport buttons such as play and stop.
Connection
fig.02
VM-C7200/C7100
S
Sampling Clock
C
Control Signal
T
Time Code
Equipment required
VM-7200/7100 [equipped with the VM-24E sold separately], VM-C7200/C7100, VSR-880 [internal IDE hard disk installed],
RBC-1/5 R-BUS cables (sold separately)
Turning on the system
Connect the equipment and then turn the power on in the following order.
VSR-880
VM-7200/7100 Processors
Settings
VM-C7200/C7100
SYS DIGITAL page
• WORD CLOCK SOURCE:
• INTERNAL SAMPLING RATE: in accordance with the VSR-880 song
SYS SYNC/MMC page
• SYNC MASTER:
• FRAME TYPE:
• MMC MASTER:
• MACHINE TYPE:
Press [LEVEL METER] to go back to the basic page.
VSR-880
[SHIFT]+[SYSTEM(
)]
• SYS MasterClk=:
[SHIFT]+[SYSTEM(
)]
• SYS MID:MMC=:
[SHIFT]+[SYSTEM(
)]
• SYS Syn:SOURCE=:
• SYS Syn:Gen.=:
• SYS Syn:MTC TYPE=:
[LEVEL/BALANCE]
• MST Direct OUT=:
[SHIFT]+[IN MIX(LEVEL/BALANCE)]
• IN1 (2, 3, ... 8) Input=: R-BUS
Press [PLAY(DISPLAY)] to go back to the basic page.
If you wish to control the track status of the VSR-880 with the VM-C7200/C7100, set CH STATUS MODE[AUDIO] and
SECTION[MULTI OUT 1-24] on the VM-C7200/C7100 to On.
* If the sample rate is set to 48.0kHz, the maximum number of simultaneous recordable tracks of the VSR-880 is six tracks per unit.
The following function is implemented with the VM-C7200/C7100 Ver.1.1 or later.
R-BUS CONFIG page
[SHIFT]+[SYSTEM(PROJECT)]
• Song Select
Basic page
[SHIFT]+[PLAY]
• Scrub Playback / stop with [F6](EXIT)
6
C
T
VM-LINK
VM-C7200/C7100 Console
[SHIFT]+[SYSTEM(PROJECT)]
INTERNAL
[SHIFT]+[SYSTEM(PROJECT)]
EXT, MULTI 1-8
30(in accordance with Syn:MTC Type on the VSR-880)
INT
HD
"SYS System PRM ?"
R-BUS
[ENT/YES]
"SYS MIDI PRM ?"
[ENT/YES]
Off/R-BUS or MASTER
"SYS Sync/Tempo ?"
INT
R-BUS
30 (in accordance with FRAME TYPE on the VM-C7200/C7100.)
(PARAMETER[
][
On
(PARAMETER[
[PAGE DOWN](R-BUS 1/2/3)
Song Store
VM-7200/7100
1-8
(CURSOR)
[F1](DIGITAL I/O)
(CURSOR)
[F3](SYNC CLOCK)
[ENT/YES]
(PARAMETER[
(PARAMETER[
[ENT/YES]
(PARAMETER[
])
][
])
"Input="
(CURSOR)
[F1](SYSTEM CONFIG)
Shut Down
VSR-880
R-BUS
S
C
T
][
])
][
])
][
])
[SHIFT]+STATUS[1] to [8]

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vm-7200R-bus

Table of Contents