Table of Contents
Advertisement
38
Finalizing the Installation
Glass Frame Removal and Installation
Warning:
The appliance must be completely cool before removing the glass.
Warning:
Do not strike or slam the glass.
Note:
Remove the barrier before removing the glass (see previous page). Replace barrier after
replacing the glass.
Open the four latches holding the glass frame in place
a
(start with the bottom two) - follow the directions shown to
the right.
Lift the glass frame up and
b
pull it forward to remove.
Re-Attaching the Glass Frame:
a) Hang the glass frame on the firebox.
b) While holding in place, attach the upper latches
(follow the instructions above in reverse).
c) Lift the glass frame slightly and attach the lower latches.
NOTE: Make sure the glass frame is all the way in place - it should be flush with
© Travis Industries
(for qualified installers only)
Latch
NOTE:
Catch
You may need to lift
(on glass frame)
the glass frame
while re-attaching.
5/15/2019 - 1508
Top of
Firebox
Glass
564 GSR2 25K CF (AUST)
Advertisement
Table of Contents
