Rear Vent Configuration With Horizontal Termination (No Vertical Rise) - Lopi 564 GSR2 25K CF Installation Manual

Finalizing the Installation

Rear Vent Configuration with Horizontal Termination (no vertical rise)


The termination must fall within the shaded area shown in the chart. Use the indicated restrictor and
diffuser positions.

Use 8" diameter vent.
3 feet
915mm
0 feet
mm
© Travis Industries
(for qualified installers only)
- Remove the Exhaust Restrictor
and Install Exhaust Deflector
- Intake Restrictor # 1 (stock)
- Diffuser Position # 1 (stock)
• Max. 12" (102mm) Horizontal Section
• No Elbows Allowed
5/15/2019 - 1508
25
564 GSR2 25K CF (AUST)