Checking The Contents Of The Box - Roland V-Drums TD-6KX Owner's Manual

Checking the Contents of the
Box
❑ TD-6V (Percussion Sound Module) x 1
❑ KD-8 (Kick Trigger Pad) x 1
❑ FD-8 (Hi-Hat Control Pedal) x 1
❑ PD-105 (Snare Pad) x 1
❑ PD-85 (Tom Pad) x 3
❑ CY-5 (Hi-Hat Cymbal) x 1
❑ CY-8 (Crash Cymbal) x 1
❑ CY-12R/C (Ride Cymbal) x 1
❑ Connection Cables
❑ Tuning Key x 1 (included in the FD-8 package)
■ TD-6KX Owner's Manual x 1
• The TD-6V Owner's Manual is included in the TD-6V
package.
• This package does not include a kick pedal. Use with a
commercially available kick pedal.
962a
* In the interest of product improvement, the specifications and/
or appearance of this unit are subject to change without prior
notice.
TD-6V
(Percussion Sound Module)
Attach the mounting plate (included with the optional drum stand) to the TD-6V.
Using the screws attached to the bottom panel, attach the plate so the unit is oriented as shown in the diagram.
fig.TD-6V.e
• To attach the mounting plate, remove the four 8
mm screws (M5 x 8) from the bottom of the TD-6V
and use them. Use of other screws may result in
damage to the unit.
• When turning the unit upside-down, get a bunch
of newspapers or magazines, and place them
under the four corners or at both ends to prevent
damage to the buttons and controls. Also, you
should try to orient the unit so no buttons or
controls get damaged.
• When turning the unit upside-down, handle with
care to avoid dropping it, or allowing it to fall or
tip over.
4
Drum Stand
Assemble the Drum Stand.
About the Stand, refer to the owner's manual for the
stand.
Narrow
Wide