Preparations; Check The Contents Of The Box; Install Batteries - Roland SPD-6 Owner's Manual

Percussion pad
Hide thumbs Also See for SPD-6:
Table of Contents

Advertisement

Preparations

Check the Contents of the Box

❏ SPD-6
❏ MIDI cable
❏ Dry battery (R6 (AA) type) x 6
❏ Stand holder mounting screw x 4
* Attached to the bottom panel (p. 8)
I Owner's Manual (this manual)

Install Batteries

Install the included batteries.
fig.0-1.e
Press to open
1
Open the battery cover (p. 8) located on the back of the SPD-6.
2
Insert the six included dry batteries (R6 (AA) type) in the orientation shown by the
diagram.
Be careful to observe the correct polarity (+, - direction) of the batteries.
3
Close the battery cover.
Using an AC adaptor (p. 12)
If an AC adaptor is desired,
use the separately sold AC
adaptor BOSS PSA series.
Expected battery life under
continuous use:
Carbon: 8 hours
Alkaline: 20 hours
These figures will vary depending
on the actual conditions of use.
• When operating on battery
power only, the [POWER]
button will blink when
battery power gets too low.
Replace the battery as soon
as possible.
• The settings of the SPD-6
will be remembered even if
the batteries run down.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents