JETWAY For Socket 370 User Manual page 24

method of rebooting in order to prolong the lift of the system's power supply.
See the figure below.
(6) Keyboard lock switch: KEYLOCK
This 2-pin connector connects to the case-mounted key switch for locking the
keyboard for security purposes.
(7) Speaker connector: SPKR
This 4-pin connector connects to the case-mounted speaker. See the figure below.
(8) Power LED: PWR LED
The Power LED is light on while the system power is on. Connect the Power
LED from the system case to this pin.
(9) Power switch: PWR
This 2-pin connector connects to the case-mounted power switch to power
ON/OFF the system.
(10) Wake On-LAN Headers (3-pin): WOL
This connector connects to a LAN card with a WAKE ON-LAN output. This
connector power up the system when a wake up signal is received through the
LAN card.
NOTE: This feature requires that Wake On LAN or Ring In Wake up is enabled.
21