Roland FP-4 Midi Implementation Manual page 28

MIDI Implementation
●0200: Overdrive→Chorus
This effect connects an overdrive and a chorus in series.
No Parameter Value
1 Overdrive 0 - 127 0-127
Drive
2 Overdrive Pan 0 - 127 L64-63R
3 Chorus Pre 0 - 125 0.0-100.0 ms
Delay
4 Chorus Rate 0 - 1 Hz, note
Mode
5 Chorus Rate #1 1 - 127 0.05-10.00 Hz
6 Chorus Rate 0 - 21 note
7 Chorus Depth 0 - 127 0-127
8 Chorus Balance 0 - 100 D100:0W-
#2 D0:100W
9 Level 0 - 127 0-127
●0201: Overdrive→Flanger
This effect connects an overdrive and a flanger in series.
No Parameter Value
1 Overdrive 0 - 127 0-127
Drive
2 Overdrive Pan 0 - 127 L64-63R
3 Flanger Pre 0 - 125 0.0-100.0 ms
Delay
4 Flanger Rate 0 - 1 Hz, note
Mode
5 Flanger Rate #1 1 - 127 0.05-10.00 Hz
6 Flanger Rate 0 - 21 note
7 Flanger Depth 0 - 127 0-127
8 Flanger 0 - 98 -98- +98 %
Feedback
9 Flanger Balance 0 - 100 D100:0W-
#2 D0:100W
10 Level 0 - 127 0-127
●0202: Overdrive→Delay
This effect connects an overdrive and a delay in series.
No Parameter Value
1 Overdrive 0 - 127 0-127
Drive #1
2 Overdrive Pan 0 - 127 L64-63R
3 Delay Mode 0 - 1 ms, note
4 Delay Time 0 - 127 1-2540 ms
5 Delay Time 0 - 21 note
6 Delay 49 - 89 0- +80 %
Feedback
7 Delay HF 0 - 17 200-8000 Hz,
Damp Bypass
8 Delay Balance 0 - 100 D100:0W-
#2 D0:100W
9 Level 0 - 127 0-127
28
Description
Degree of distortion
Also changes the volume.
Stereo location of the overdrive
sound
Adjusts the delay time from the
direct sound until the chorus sound
is heard.
When this is set to "note," the effect is
synchronized with the tempo.
Frequency of modulation (Hz)
Frequency of modulation (note)
Depth of modulation
Adjusts the volume balance between
the sound that is sent through the
chorus (W) and the sound that is not
sent through the chorus (D).
Output Level
Description
Degree of distortion
Also changes the volume.
Stereo location of the overdrive
sound
Adjusts the delay time from when
the direct sound begins until the
flanger sound is heard.
When this is set to "note," the effect is
synchronized with the tempo.
Frequency of modulation (Hz)
Frequency of modulation (note)
Depth of modulation
Adjusts the proportion of the flanger
sound that is fed back into the effect.
Negative (-) settings will invert the
phase.
Adjusts the volume balance between
the sound that is sent through the
flanger (W) and the sound that is not
sent through the flanger (D).
Output Level
Description
Degree of distortion
Also changes the volume.
Stereo location of the overdrive
sound
When this is set to "note," the effect is
synchronized with the tempo.
Adjusts the delay time from the
direct sound until the delay sound is
heard. (Hz)
Adjusts the delay time from the
direct sound until the delay sound is
heard. (note)
Adjusts the proportion of the delay
sound that is fed back into the effect.
Adjusts the frequency above which
sound fed back to the effect will be
cut. If you do not want to cut the high
frequencies, set this parameter to
Bypass.
Adjusts the volume balance between
the sound that is sent through the
delay (W) and the sound that is not
sent through the delay (D).
Output Level
●0203: Distortion→Chorus
The parameters are essentially the same as in "Overdrive→Chorus," with the exception of
the following two.
Overdrive Drive→Distortion Drive
Overdrive Pan→Distortion Pan
●0204: Distortion→Flanger
The parameters are essentially the same as in "Overdrive→Flanger," with the exception of
the following two.
Overdrive Drive→Distortion Drive
Overdrive Pan→Distortion Pan
●0205: Distortion→Delay
The parameters are essentially the same as in "Overdrive→Delay," with the exception of the
following two.
Overdrive Drive→Distortion Drive
Overdrive Pan→Distortion Pan
●0206: Enhancer→Chorus
This effect connects an enhancer and a chorus in series.
No Parameter Value
1 Enhancer Sens 0 - 127 0-127
2 Enhancer Mix 0 - 127 0-127
3 Chorus Pre 0 - 125 0.0-100.0 ms
Delay
4 Chorus Rate 0 - 1 Hz, note
Mode
5 Chorus Rate #1 1 - 127 0.05-10.00 Hz
6 Chorus Rate 0 - 21 note
7 Chorus Depth 0 - 127 0-127
8 Chorus Balance 0 - 100 D100:0W-
#2 D0:100W
9 Level 0 - 127 0-127
●0207: Enhancer→Flanger
This effect connects an enhancer and a flanger in series.
No Parameter Value
1 Enhancer Sens 0 - 127 0-127
2 Enhancer Mix 0 - 127 0-127
3 Flanger Pre 0 - 125 0.0-100.0 ms
Delay
4 Flanger Rate 0 - 1 Hz, note
Mode
5 Flanger Rate #1 1 - 127 0.05-10.00 Hz
6 Flanger Rate 0 - 21 note
7 Flanger Depth 0 - 127 0-127
8 Flanger 0 - 98 -98- +98 %
Feedback
9 Flanger Balance 0 - 100 D100:0W-
#2 D0:100W
10 Level 0 - 127 0-127
Description
Sensitivity of the enhancer
Level of the overtones generated by
the enhancer
Adjusts the delay time from the
direct sound until the chorus sound
is heard.
When this is set to "note," the effect is
synchronized with the tempo.
Frequency of modulation (Hz)
Frequency of modulation (note)
Depth of modulation
Adjusts the volume balance between
the sound that is sent through the
chorus (W) and the sound that is not
sent through the chorus (D).
Output Level
Description
Sensitivity of the enhancer
Level of the overtones generated by
the enhancer
Adjusts the delay time from when
the direct sound begins until the
flanger sound is heard.
When this is set to "note," the effect is
synchronized with the tempo.
Frequency of modulation (Hz)
Frequency of modulation (note)
Depth of modulation
Adjusts the proportion of the flanger
sound that is fed back into the effect.
Negative (-) settings will invert the
phase.
Adjusts the volume balance between
the sound that is sent through the
flanger (W) and the sound that is not
sent through the flanger (D).
Output Level