Filling The Clean Water Tank - Bissell CROSSWAVE X7 CORDLESS PET PRO Manual

Filling the Clean Water Tank

Go to support.BISSELL.com to watch additional how-to videos.
1.
The clean water tank is
located on the back of the
machine. Pull the tank up to
remove.
4.
Fill with hot (140°F/60°C
MAX) tap water to the WATER
FILL line. Do not use boiling
water. Do not heat water in
the microwave.
8 BISSELL.com
2.
Open the cap on top of the
tank.
5.
Add formula to the
FORMULA FILL line.
3.
Choose the best BISSELL®
formula and brush roll for
your needs using the chart on
page 7.
6.
Close the cap. Slide the tank
back into place.