After-Cleaning Care - Bissell CROSSWAVE X7 CORDLESS PET PRO Manual

After-Cleaning Care

Go to support.BISSELL.com for a full list of how-to videos.
Important: The filter must be cleaned and dried after every use to maximize suction and performance.
Replace the filter every 3 months.
1.
Press the button on the top of
the foot to release the brush roll
window.
4.
The brush and window can
be hand washed.
7.
Remove filter from the top
of the tank by pulling it up.
WARNING
electrical outlet before performing maintenance or troubleshooting on the dock.
12 BISSELL.com
2.
Pull the brush roll tab to
remove.
5.
Remove and empty the
dirty water tank following
steps on page 10.
8.
Wash filter and screen
with warm water and mild
detergent. Rinse the bottom of
the tank cover.
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
3.
Use the Clean Out Brush
hook to remove hair wrap.
6.
Use the Clean Out Brush to
clean the dirty water tank.
9.
Leave all parts out to dry
before reassembling.
CONTINUED ON NEXT PAGE