Clean Out Cycle - Bissell CROSSWAVE X7 CORDLESS PET PRO Manual

Clean Out Cycle

Go to support.BISSELL.com for a full list of how-to videos.
Note: For best results, run the Clean Out Cycle no more than two times after each cleaning session.
1.
Place the machine on the
3-in-1 Docking Station.
4.
Push the Clean Out Cycle
Button to start the 40-second
cycle.
WARNING
electrical outlet before performing maintenance or troubleshooting on the dock.
2.
Empty dirty water tank
prior to starting the cycle.
5.
For easy drying, press the
button on top of the foot to
release the window. Rest the
window on the dock. See page 12
for more after-cleaning care tips.
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
3.
Make sure water reaches the
Clean Out Cycle line. Refill if
needed.
6.
Remove the machine from
the dock and wipe out the tray.
Do NOT rinse under faucet.
This keeps water out of the
charging plug.
BISSELL.com 11