What's In The Box; Filling The Clean Water Tank - Bissell SPINWAVE SMARTSTEAM 3712 Series Manual

What's in the Box?

Standard accessories may vary by model. To identify what should be included with your purchase,
please refer to the "Carton Contents" list located on the carton top flap.
Handle
Assembly
1. Slide handle into handle
tube until it clicks into place.
Slide handle tube with handle
installed to body until it clicks
into place.

Filling the Clean Water Tank

Note: Use of distilled water in place of tap water is recommended for optimal steam performance
and to prolong the life of your steamer. Do not use formula, chemicals or cleaning solutions
(including vinegar) in the water tank. Doing so may cause damage to the machine.
To add a fresh scent as you clean, try BISSELL® Demineralized Waters in scents like Citrus, Eucalyptus
Mint and Spring Breeze.
1. Slide water tank upward to
remove.
Handle Tube
2. Insert body into steam mop
head until screw holes align.
Tighten screw with Phillips-head
screw driver.
2. Unscrew water tank cap
to open and fill with water.
Do not use formula, chemicals
or cleaning solutions
(including vinegar) in the
water tank. Doing so may
cause damage to the machine.
Body Mop Head Mop Pads
Required for Assembly
3. Position steam mop directly
over mop pads and align
center plastic piece on mop
pads with center of steam mop
head. Press down firmly.
3. Screw and tighten cap.
Reinstall water tank, sliding
down tank until it clicks into
place.
Screw
BISSELL.com 3