Bissell CROSSWAVE X7 CORDLESS PET PRO Manual page 13

After-Cleaning Care
(continued)
10.
Clean along the inside of
the foot and suction hose with
the brush.
13.
Replace the brush roll
window by lining up tabs on
the edges of the foot.
16.
Insert the bottom of the
tank first. Pivot the top toward
the machine until it clicks into
place.
WARNING
electrical outlet before performing maintenance or troubleshooting on the dock.
11.
Place the end of the brush
into the right side of the foot.
14.
Press the window back so
it clicks into place.
17.
Wipe the dock with a cloth.
Do NOT rinse under faucet.
This keeps water out of the
charging plug.
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
12.
Press the tab of the brush
down so it locks into place.
15.
Reassemble the dirty water
tank.
18.
Wipe the gold charging
contacts with a cloth.
BISSELL.com 13