Table of Contents
Advertisement
O
perations
Before you clean
Thoroughly sweep or vacuum floor
prior to cleaning with the Spiffy
Steam Mop.
Cleaning hard floors
Your Spiffy Steam Mop is designed
to clean hard flooring such as
ceramic tile, vinyl, marble, stone
and sealed hard wood floors.
Use of your Spiffy Steam Mop on
waxed or some unwaxed floors
may result in a diminished
glossiness. The Spiffy Steam Mop
is not for all floors, for best results,
test in an inconspicuous area or
check the care instructions from
your flooring manufacturer.
1. When the ready light illuminates,
begin cleaning by slowly passing
over the surface while pressing the
steam on demand trigger to emit
steam as needed.
2. To sanitize an area of your floor,
(attack invisible germs and bacteria)
put the center of the Spiffy Steam
Mop over the spot for a minimum of
15 seconds, but no longer than 20
seconds. For larger areas, overlap
swivel head placement.
3. When the Spiffy Steam Mop stops
emitting steam, turn the unit off.
Simply remove the water tank, refill,
and continue cleaning.
8
www.pawsitivelycleanpet.com
WARNING:
Never put descaling
aromatic, alcoholic, or
detergent products into
the steam cleaner, as this
may damage it or make it
unsafe for use.
Tip:
During first use, it may take sev-
eral seconds for the Spiffy Steam
Mop to begin steaming. The
water needs to flow through the
filter to the heater. This delay will
only occur during initial use or
when using a new filter.
8 0 0 . 2 3 7 . 7 6 9 1
Advertisement
Table of Contents
