Mounting And Protection Accessories - Bosch AVENAR detector 4000 User Manual

AVENAR detector 4000
2.6.6

Mounting and protection accessories

Support Plates
The support plates are made from 1.8 mm thick ABS plastic and are clamped between the
detector base and the ceiling.
TP4 400 Support Plate
The TP4 400 Support Plate is intended for an installation
height up to 4 m and is designed for labels up to a size of
approx. 65 x 34 mm.
TP8 400 Support Plate
The TP8 400 Support Plate is intended for an installation
height up to 8 m and is designed for labels up to a size of
approx. 97 x 44 mm.
SK 400 Protective Basket
The SK 400 Protective Basket is installed over the detector
and gives the detector substantial protection against
damage.
If the detector is mounted in a sports facility, for example,
the protective basket prevents balls or other sports
equipment from hitting the detector and damaging it.
SSK 400 Protective Dust Cover
The SSK 400 Protective Dust Cover is necessary during
construction work to protect an installed detector base,
with or without detector module, from contamination. The
protective dust cover made of polypropylene (PP) is pushed
onto the installed detector base.
WA400 Wall bracket
The WA400 Wall bracket is used to install detectors above
door frames or similar in compliance with DIBt.
The bracket is supplied with a pre-mounted detector base
(the detector shown is not included in the scope of
delivery).
Bosch Sicherheitssysteme GmbH
User manual
System Overview | en
15 / 4
2023-06 | 07 | F.01U.283.550
13