Rimage DL5200 Replacement Procedure page 2

0BReplace a Recorder on a Rimage DiscLab System
2. Disconnect the following cables from the recorder.
Caution! Some cables in this system are latched. Equipment damage may occur if cables are not
disconnected appropriately.
•
DL5200/DLN5200
Power Cable
Flex Cable
Power Cable
Flex
Cable
DL5200/DLN5200
3. On the left and right sides of the system, remove the Allen screws (Qty. 2 per side, 4 total) that hold the
recorder to be replaced.
DL5200/DLN5200
2000122_D
DiscLab™, DL5200™ and DLN5200™
•
DiscLab
Recorders
FireWire Cable
Power
Cable
© 2008, Rimage Corporation
Power cable
FireWire cable
DiscLab
DiscLab
Recorders
2