Rimage DL5200 Setup And Installation

Rimage dl5200: installation guide

Hide thumbs Also See for DL5200:

Download this manual See also: Reference Manual, User Manual

Rimage DL5200

Obtain a PC that meets the PC speciﬁcations

listed in your DL5200 User Guide.

This document is intended for people who are

familiar with hardware setup, software installation,

and Windows operating systems. If you do not

understand the procedures in this document, ask

your computer technician for help or refer to your

PC documentation.

Prepare the DL5200.

Tape

Setup and Installation

™

Set up the PC.

a. Power down the PC.

b. If your PC does not have a

FireWire card, install the FireWire/

USB card included with your

DL5200.

110797_C

Table of Contents

Page 1: Setup And Installation
Rimage DL5200 Before you begin: Obtain a PC that meets the PC speciﬁcations listed in your DL5200 User Guide. This document is intended for people who are familiar with hardware setup, software installation, and Windows operating systems. If you do not...
Page 2 Place the printer on the DL5200 so that the plastic feet slide into the slots on the printer plate. Printer plate Slots for feet c. Connect the D-shaped cable from the DL5200 to the printer as indicated by the D-shaped label. 110797_C...
Page 3: Install The Rimage Software
 install the software on the PC. a. Power on the PC. b. Place the Rimage software CD in the PC disc drive.  Note: If the software installation does not start automatically, navigate: Start > Run and browse to the Setup.exe ﬁle on the software CD.
Page 4: Install The Printer Driver
 install the printer driver on the PC. a. With the Rimage software CD in the PC disc drive, navigate: Start > Run > and browse to the Rimage software CD. b. On the Rimage software CD, navigate: Printer Drivers >...