Ricoh CL3500N Maintenance Manual page 81

Ricoh cl3500n: user guide
Hide thumbs Also See for CL3500N:
Table of Contents

Advertisement

Troubleshooting
Messages
ROM Update
Receiving Data
SC XXX-X
Power Off On
/ Call Service if
error reoccurs
SD authenticatn.
failed
Setting change
in process
Set Transfr.Belt
or UsedTonerBtl.
SSID not entered
Supply order
failed
Toner is almost
empty: Black
Toner is almost
empty: Cyan
Toner is almost
empty: Magenta
Toner is almost
empty: Yellow
Update Mode Err.
Power Off On
Used Toner is
almost full
Description
The printer is receiving updat-
ed data.
Turn the power off and then
on. If the message appears
again, contact your sales or
service representative.
Authentication for the SD card
has failed.
The settings are being
changed.
The transfer belt or waste ton-
er bottle is not set correctly, or
not set.
This message appears if the
SSID has not been entered.
Supply order has failed.
The printer is almost out of ton-
er (Black).
The printer is almost out of ton-
er (Cyan).
The printer is almost out of ton-
er (Magenta).
The printer is almost out of ton-
er (Yellow).
The printer has failed to start
updating data.
The waste toner bottle is al-
most full.
Recommended Action
Don't turn off the printer while
it is receiving data.
Turn the power off, and then
on. If the message appears
again, contact your sales or
service representative.
Turn the power switch off and
then back on again. If the
message appears again, con-
tact your sales or service rep-
resentative.
Wait a while.
Set transfer belt or waste ton-
er bottle correctly.
Enter the SSID.
The use is required to reset
the job.
Prepare to replace the toner
cartridge (Black) when the
message [Add Toner Black] ap-
pears on the display.
Prepare to replace the toner
cartridge (Cyan) when the
message [Add Toner Cyan] ap-
pears on the display.
Prepare to replace the toner
cartridge (Magenta) when the
message [Add Toner Magenta]
appears on the display.
Prepare to replace the toner
cartridge (Yellw) when the
message [Add Toner Yellow]
appears on the display.
Turn the printer OFF and then
back ON to restart.
Prepare to replace the waste
toner bottle.
See
p.32 "Replacing the
Waste Toner
Bottle".
81

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clp22

Table of Contents