Ricoh CL3500N Maintenance Manual page 10

Paper and Other Media
Number of sheets that can
be set
Both-side printing
Thick Paper
Paper thickness
Printer setup
Printer driver setup
Enabled paper feeding tray Bypass Tray
Both-side printing
Additional cautions
Adhesive labels
Printer setup
Printer driver setup
Enabled paper feeding tray Bypass Tray: 50
Both-sided printing
Additional cautions
OHP transparencies
Printer setup
• Tray 1: 530
• Tray 2, Tray 3 (Paper Feed Unit Type 3000): 530
• Bypass Tray: 100
❒ Make sure paper is not stacked higher than the upper limit
mark (T) inside the tray. Make sure paper is not stacked higher
than the paper guides inside the bypass tray.
Possible
2
105 - 199 g/m (28 - 53 lb.)
• [Thick Paper 1]: 105 - 165 g/m
• [Thick Paper 2]: 165 - 199 g/m
Press [Paper Input] menu, [Paper Type] and then [Thick Paper 1] or
[Thick Paper 2] on the control panel.
Click [Thick1] or [Thick2] in the [Type:] list.
• [Thick Paper 1]: 30
• [Thick Paper 2]: 10
❒ Make sure paper is not stacked higher than the paper guides
inside the bypass tray.
Not possible
• Print speed is slightly slower than when using plain paper.
Press [Paper Input] menu, [Paper Type], and then [Labels] on the
control panel.
Click [Labels] in the [Type:] list.
❒ Make sure paper is not stacked higher than the paper guides
inside the bypass tray.
Not possible
Print speed is slightly slower compared to plain paper.
Press [Paper Input] menu, [Paper Type], and then [Transparency] on
the control panel.
2
(28 - 44 lb.)
2
(44 - 53 lb.)
10