Ricoh CL3500N Maintenance Manual page 80

Troubleshooting
Messages
Replace Color
PCU soon
Replace
Fusing Unit
Replace Fusing
Unit soon
Replace
Transfer Belt
Replace Transfer
Belt soon
Replace Used
Toner Bottle
Reset Fusing
Unit correctly
Reset Paper
Bypass Tray
Reset PCU
correctly
XXX/XXX
Reset Toner
XXX/XXX
Reset Tray #
or Form Feed
Resetting Job...
ROM Update
Waiting for Data
Description
The time to replace the color
PCU is soon.
It is time to replace the fusing
unit.
The time to replace the fusing
unit soon.
It is time to replace the transfer
belt.
The time to replace the trans-
fer belt.
It is time to replace the waste
toner bottle.
There is no fusing unit, or the
fusing unit is not installed cor-
rectly.
There is paper left in the by-
pass tray.
The indicated photo conductor
unit(s) is/are not set correctly,
or not set.
XXX: Yellow/ Magenta/Cy-
an/Black
The indicated toner cartridge
is not set correctly.
XXX: Yellow/Magenta/Cy-
an/Black
The indicated paper input tray
is not set correctly, or not set.
A job is being reset.
The printer is waiting for up-
dated data.
Recommended Action
Prepare to replace the color
PCU when the message [Re-
place Color PCU] appears on
the display.
Replace the fusing unit with a
new one.
See p.44 "Replacing the Fus-
ing Unit".
Prepare to replace the fusing
unit when the message [Re-
place Fusing Unit] appears on
the display.
Replace the transfer belt with
a new one.
See p.51 "Replacing the Inter-
mediate Transfer Unit".
Prepare to replace the trans-
fer belt when the message
[Replace Transfer Belt] appears
on the display.
Replace the waste toner bot-
tle.
See p.32 "Replacing the
Waste Toner Bottle".
Set the fusing unit correctly.
Remove paper from the by-
pass tray, and then reset the
paper.
Set the indicated photo con-
ductor unit(s) correctly.
See p.35 "Replacing the Pho-
to Conductor Unit".
Set the indicated toner car-
tridge(s) correctly.
See p.28 "Replacing the Ton-
er Cartridge".
Set the indicated paper input
tray correctly.
Wait a while.
Don't turn off the printer while
it is waiting for data.
80