Johnson Controls 300 Series Manual page 85

MIB-OWS-F-0
Step 2: Twist the collar on the cable
to line up with the peg on the
MIB-OWS.
Twist
Collar
Peg
Figure 31: Connecting Fiber Optic Cable to MIB-OWS
Power Connection
Plug the Fire-Net NCM into the power outlet at the top of either the
Fire Watchdog Enclosure or the standard UPM. There are two screws
and wire ties provided with the Fire-Net NCM to fasten the cord inside
the enclosure or UPM. Run the cord along the right hand side of either
enclosure and choose convenient locations to mount the ties.
Network Control Module 300 Series Technical Bulletin
Step 3: Push forward and twist
to lock in place.
Twist
Push
Step 1: Line up the peg on the cable with
the slot on the MIB-OWS.
fibercbl
85