Advertisement
This product earned the ENERGY STAR certification by meeting strict energy efficient guidelines set by the US EPA. The energy efficiency of the ENERGY STAR qualified model is measured based on a ratio between the model's CADR for dust and the electrical energy it consumes, or CADR/Watt.
This appliance has an optional ionizer feature which, when turned on, releases negative ions into outgoing filtered air to help the air purification process.
What Are Ions?
Ions are tiny particles that carry a positive or negative charge. They exist naturally around us: in the air, water, and ground. Both positive and negative ions are colorless, odorless, and harmless.
How Does The Ionizer Work?
Negative ions help air purification by attaching themselves to very small airborne particles in the room.
These particles take on a negative charge and may join with positively charged particles such as dust, pollen, smoke, and pet dander to form larger particles. These larger particles are then more easily captured by the filter system.
Important Notes:
Your ionizer may produce an occasional popping or cracking sound. This is normal and occurs when a small buildup of ions is discharged.
After extended use, you may notice dust around the grills or front panel. This is caused by negative ions exiting the air outlet, evidence of the ionizer's air cleaning effectiveness. You can remove the dust with a soft brush or clean, damp cloth.
Larger particles may be attracted to positively charged surfaces throughout the home, like walls or floors.
The ionizer in this appliance produces less ozone than the UL established limits of 50ppb. However, in high concentrations, ozone can be harmful to birds and small pets. To prevent ozone buildup, we suggest using the ionizer in well ventilated areas with the air purifier fan on.
The permanent filter allows for easy maintenance and eliminates the hassle of filter replacement. The HEPA-Type (High Efficiency Particulate Air) filter is designed to remove up to 99% of airborne pollutants, 2 microns or larger, from the air that passes through them. The pollutants may include (but are not limited to) tobacco smoke, household dust, pet dander, and pollen.
For optimum air filtration, operate your Bionaire® air purifier continuously on the MEDIUM (2) setting. Its rugged motor has been designed to give many years of use. For quieter operation (such as in a bedroom), select the LOW (1) setting. When high levels of air pollution are present, select the HIGH (3) setting to quickly circulate and filter the room air.
The Night Light offers an optimal illumination for night time use. Press the Night Light button to activate and de-activate the night light.
The filter indicator light eliminates guesswork by letting you know when it is time to clean the filter. To reset the Filter Check Indicator, press and hold the Filter Reset Button for 3 seconds while the unit is operating (in any speed).
NOTE: If operating unit on a carpeted floor, it is not recommended to use on carpets with more than a ½ inch pile height.
NOTE: Every few weeks, check the condition of filter.
Filter life will vary, depending on air quality and usage. Under normal conditions of continuous use, the HEPA-type filter will operate efficiently for 3-4 months, but we recommend regular cleaning for optimal performance.
After approximately 4 months of operation, the Filter Check Indicator will will illuminate (yellow LED) to alert you to clean filter before further use.
To remove the filter for cleaning:
To reinstall the permanent filter after cleaning:
NOTE: Should your filter become damaged or lost, new filters can be purchased at a retailer near you, online at www.bionaire.com, or by calling 1-800-253-2764.
Problem | Solution |
| Make sure unit is properly plugged in and outlet is energized. Make sure unit turned ON. Make sure filter is properly installed and rear grill is seated correctly. |
| Make sure nothing is blocking air inlet and filtered air outlets. Check condition of the filter and clean if necessary. Open the base air inlet grill and make sure that any plastic packaging has been removed from the filter, if applicable. |
| Make sure parts are firmly positioned in place. Open the base air inlet grill and make sure that any plastic packaging has been removed from the filter, if applicable. |
| Check condition of the filter and clean if necessary. Press and hold the Filter Reset Button for 3 seconds under power on condition. |
| Line up the Lock icon () on the base air inlet grill with the power cord outlet on the air purifier housing to ensure the grill is securely locked in place (see FILTER CLEANING INSTRUCTIONS section for details). |
For a wealth of information about your air purifier and other Bionaire® products, visit our website at www.bionaire.com or call 1-800-253-2764.
© 2012 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All Rights Reserved.
Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Bionaire BAP600 - Permanent HEPA Type Air Purifie Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the BAP600 that isn't answered in the manual? Leave your question here.