Configuring The Network Interface Board With A Web Browser - Ricoh AP400 Network Manual

Configuring the Network Interface Board
with a Web Browser
You can check the status of a machine and change its settings using the Web
browser.
❖ ❖ ❖ ❖ Configuring the machine
This requires the TCP/IP protocol to be installed. After the machine has been
configured to use the TCP/IP protocol, it will be possible to adjust the settings
using a Web Browser.
Reference
For more information about configuring the machine to use the TCP/IP
protocol, see the Setup Guide.
❖ ❖ ❖ ❖ Operating system browser requirements
Operating system
Windows 95/98/Me
Windows 2000/XP/Server 2003
Windows NT 4.0
Mac OS 8.1 ∼ 9.2.2
Mac OS X 10.1 or later
Limitation
❒ If the Web browser in use is older than the recommended version or [Java-
Script] and [Cookie] are not effective, display and operation problems may
occur.
❒ If you use a proxy server, change the Web browser settings. Consult your
network administrator about the settings.
❒ Sometimes after clicking [Back] , the previous page may not appear. In this
case, click [Refresh] or [Reload] .
❒ This machine information cannot reload automatically. Click [Reload] or
[Refresh] on the Web browser when you want to reload this machine infor-
mation.
❖ ❖ ❖ ❖ Specifying the Address
Point the browser to the URL or IP address of the printer (e.g., ht-
tp://XXX.XXX.XXX.XXX/, where the Xs are the numbers in the IP address).
If the host name of the machine is registered on the DNS server or WINS serv-
er, you can enter it.

Configuring the Network Interface Board with a Web Browser

Browser
Microsoft Internet Explorer 5.5 or later
Netscape Navigator 6.2 or later
Netscape Navigator 6.2 or later
Netscape Navigator 6.2 or later
7
87