Windows 2000/Xp/Server 2003, Windows Nt 4.0 - Ricoh AP400 Network Manual

NetWare Configuration
J J J J
Click [OK] to close the Printer Properties, and again, open it.
K K K K
Click the [Printer Settings] tab.
L L L L
Select to clear the [Form feed] and [Enable banner] check boxes.
Note
❒ You should not select these boxes because they should be specified using
the printer driver. If they are selected, the printer might not print correctly.
When using the PostScript printer driver
Follow these steps to set up for the PostScript printer driver.
A Click the [PostScript] tab.
B Click [Advanced].
C Click to clear the [Send CTRL+D before job] and [Send CTRL+D after job] check
boxes.
5
M M M M
Click [OK] to close the Printer Properties.

Windows 2000/XP/Server 2003, Windows NT 4.0

Follow the procedure to set up a Windows 2000/XP/Server 2003, Windows NT
4.0 client.
Preparation
Log on to the NetWare file server before starting the following procedure.
A A A A
Double-click the [My Network Places] icon on the desktop and navigate to the
queue you want to use, and then double-click it.
The printers dialog box appears.
Note
❒ When using Windows NT 4.0, the [Network Neighborhood] icon appears on
the desktop instead of the [My Network Places] icon.
B B B B
Click [No].
C C C C
Close all the applications that are currently running.
D D D D
Insert the CD-ROM labeled "Printer Drivers and Utilities" into the CD-
ROM drive.
If the setup menu starts automatically, you can go to the next step. If not, see
the Setup Guide.
E E E E
The [Printer Installation] dialog box appears.
76