Using Image Or Voice Annotations; Inserting Image Or Voice Annotations; Turn Off The Recorder - Fluke 1750/ET Operator's Manual

Using Image or Voice Annotations

While you are monitoring data with a Recorder, you may find it helpful to take a picture
that relates to the power quality data you are recording, or to record verbal comments as
you observe the conditions or review the data being measured. You can then associate the
image or recording with the data being recorded by adding annotations that reference
them.
The PDA includes a microphone for recording notes which are saved as .WAV files, and
an optional camera accessory is available on the PDA which will capture images as .jpg
files.
You can associate both images and audio files with the data being gathered in the
Recorder by inserting annotations and specifying the name of a .WAV or .jpg file. After
you download data from the Recorder, you can then move the image and audio files to
the PC along with the recorded data (.odn) file.
You can also associate other types of files with the annotation. For
example, if you had a .MPG file with a movie, or a .DOC file with
associated information. You can enter any file name using this annotation
method.

Inserting Image or Voice Annotations

1. Set up the Recorder and begin monitoring.
2. Using your PDA-cam (not available in standard PDA supplied) or another camera,
take a picture of what you want to capture.
3. Click the Annotate icon to display the Annotate screen.
4. Move the image or audio file to a location that will make it easier to Transfer it to a
PC later, when you download and move the recorded data file to your PC. Place the
file into the synchronization folder on your PDA, so that it will be automatically
transferred into the sync folder on the PC the next time you dock the PDA.

Turn off the Recorder

The Recorder always has the UPS enabled to allow a 5-minute pass through time on a
voltage interruption. When you pack the Recorder for transport, you have the option to
shut down the Recorder and disable the UPS before unplugging the power cord.
To turn off the Recorder:
1. Select Menu>Tools>1750 Shut down...
2. Confirm the warning message.
3. Wait until the Power LED is solid green.
The power cord can be safely unplugged.
Note
Power Recorder
Turn off the Recorder
47