Ejecting The Memory Card; Shielding D-Sub Connectors; Fig. 7-36: Ejecting The Memory Card; Fig. 7-37: Shielding D-Sub Connectors - Bosch Rexroth IndraControl VCP 25 Project Planning Manual

R911299720 / 02 | Rexroth IndraControl VCP 25
Interfaces
7.3.2

Ejecting the Memory Card

7.4

Shielding D-SUB Connectors

Electric Drives and Controls | Bosch Rexroth AG
To remove the card, press the ejection button on the operating device.

Fig. 7-36: Ejecting the memory card

You must shield D-SUB connectors as follows:

Fig. 7-37: Shielding D-SUB connectors

1 D-SUB connector
2 Shield
3 Cable clip
4 Cable
The shield must be folded back into a flat position over the cable
sheath.
When fastening the cable with the cable clip, as much of the shielding
as possible must be in contact with the housing and sufficient strain
relieve must be ensured.
7-23