Interfaces; Fig. 7-1: Device Variants - Bosch Rexroth IndraControl VCP 25 Project Planning Manual

R911299720 / 02 | Rexroth IndraControl VCP 25

Interfaces

7 Interfaces
Electric Drives and Controls | Bosch Rexroth AG
The device can either be supplied as a standard device or field bus
device.
The universal interface X3 combines several interface standards in one
connector. The connector is divided into two channels. The communi-
cation channel (SER1) is operated separately from the channel for the
upload/download/logging printer/scanner (SER2).
For the communication channel (SER1), the protocol-specific use only
allows one of the three interface standards to be used.
Depending on the device variant, several interfaces are available to
you:
Type code
VCPxx.xxxx-xxxRS-xx-xx
VCPxx.xxxx-xxxDN-xx-xx
VCPxx.xxxx-xxxIB-xx-xx
VCPxx.xxxx-xxxPB-xx-xx

Fig. 7-1: Device variants

Available interfaces
X X - -
X - X -
X - - X
X - - -
7-1
-
-
-
X